AMERICAN MORTISE CYLINDER

American Mortise Cylinder

American Mortise Cylinder

Blog Article

Mortise cylinders are designed to fit inside doors that have been drilled for keys. When a door is being closed, a mortise cylinder is used to close it. This cylinder can have either a key or a lock. It is possible to buy a new cylinder with an existing key, or one that is compatible with an existing key. When ordering a new cyclinder, be sure to provide the correct key number.
Mortise cylinders are a common lock accessory, and are available in a wide variety of styles. They are designed to fit into standard keyways and can be found in interchangeable core formats. The standard cylinder is a round, threaded piece with a tapered face. Depending on the style and model, they may require a spacer for the mortise to be the correct depth.
Most Mortise cylinders come with two to four pins for security. The keyholes on the mortise cylinders are drilled into the inside of the case. For added security, a mortise cylinder may have a corresponding sash with two locks, or the keyholes may be a single hole. Alternatively, a slender cylinder may be used for both lock and mortise functions. The cylinder is used to prevent unwanted access to the inside of the home.
Mortise cylinders are used for residential and commercial buildings. The mortise cylinders will have a rectangular faceplate that is flush against the door and will be secured with screws. They will also have a round tailpiece that will move to unlock the lock when pressed. Some glass doors use the same more info type of lock, but they will be smaller. The cylinders can be purchased in two different sizes - a one-inch diameter for the escutcheon trim, and a one-inch width for rose trim.

web:https://www.goldtechhardware.com/
e-mail:info@goldtechhardware.com

Report this page